 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Part Number: ZM2BB67S www.SunLED.com 4.0x4.0mm RIGHT ANGLE SURFACE MOUNT LED LAMP PRELIMINARY SPEC Features SINGLE COLOR. SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER PROCESS. AVAILABLE ON TAPE AND REEL. IDEAL FOR BACKLIGHTING. PACKAGE : 500PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 4. RoHS COMPLIANT. ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. Operating Characteristics (TA=25C) Forward Voltage (Typ.) (IF=20mA) Forward Voltage (Max.) (IF=20mA) Unit V mA mA mW C V Reverse Current (Max.) (VR=5V) Wavelength of Peak Emission (Typ.) (IF=20mA) Wavelength of Dominant Emission (Typ.) (IF=20mA) Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Capacitance (Typ.) (VF=0V, f=1MHz) VF VF IR M2BB (InGaN) 3.2 3.7 10 Unit V V uA Absolute Maximum Ratings (TA=25C) Reverse Voltage Forward Current Forward Current (peak) 1/10 Duty Cycle 0.1ms Pulse Width Power Dissipation Operating Temperature Storage Temperature VR IF iFS PT TA Tstg M2BB (InGaN) 5 30 100 111 -40 ~ +85 -40 ~ +85 1000 P 458 nm D 465 nm 22 nm Electrostatic Discharge Threshold (HBM) C 110 pF Part Number Emitting Color Emitting Material Lens-color Luminous Intensity (IF=20mA) mcd min. typ. 278 Wavelength nm P Viewing Angle 2 1/2 ZM2BB67S Blue InGaN Water Clear 110 458 120 Published Date : FEB 27,2008 Drawing No :SDSA6298 V1 Checked : B.L.LIU P.1/5 Part Number: ZM2BB67S www.SunLED.com 4.0x4.0mm RIGHT ANGLE SURFACE MOUNT LED LAMP Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might leads to damage and premature failure of the LED. 1. Handle the component along the side surfaces by using forceps or appropriate tools. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. Published Date : FEB 27,2008 Drawing No :SDSA6298 V1 Checked : B.L.LIU P.2/5 Part Number: ZM2BB67S www.SunLED.com 4.0x4.0mm RIGHT ANGLE SURFACE MOUNT LED LAMP M2BB Published Date : FEB 27,2008 Drawing No :SDSA6298 V1 Checked : B.L.LIU P.3/5 Part Number: ZM2BB67S www.SunLED.com 4.0x4.0mm RIGHT ANGLE SURFACE MOUNT LED LAMP Recommended Soldering Pattern (Units : mm;Tolerance: 0.1) The device has a single mounting surface. The device must be mounted according to the specifications. Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : FEB 27,2008 Drawing No :SDSA6298 V1 Checked : B.L.LIU P.4/5 Part Number: ZM2BB67S www.SunLED.com 4.0x4.0mm RIGHT ANGLE SURFACE MOUNT LED LAMP PACKING & LABEL SPECIFICATIONS ZM2BB67S Published Date : FEB 27,2008 Drawing No :SDSA6298 V1 Checked : B.L.LIU P.5/5 |
Price & Availability of ZM2BB67S
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |